There Is No Such Thing As A Second Impression.
Don’t miss anything. Follow Us.
Top

India’s First Commercial-Scale Sustainable Aviation Fuel Plant: Technology, Benefits and Challenges

Subject: Science and Technology | Environment | Energy Security


Exam Relevance:

  • UPSC Prelims: Sustainable Aviation Fuel | Used Cooking Oil | ICAO | CORSIA | Fuel-blending targets
  • UPSC GS-II: Government Policies | International Cooperation | Environmental Agreements
  • UPSC GS-III: Clean Energy | Indigenous Technology | Environmental Pollution | Infrastructure
  • HPAS: Sustainable Development | Waste Management | Green Transport and Tourism

Why in the News?

India’s first commercial-scale Sustainable Aviation Fuel (SAF) production facility at Indian Oil Corporation’s Panipat refinery in Haryana is ready for commercial production.

According to Indian Oil’s chairman, the facility produced its first batch on 16 November 2026 and received the requisite Directorate General of Civil Aviation (DGCA) approvals. The unit has a reported capacity of 30,000 tonnes annually and uses used cooking oil as feedstock.

The development comes ahead of India’s indicative SAF-blending targets for international flights, beginning with 1% in 2027. It highlights the potential to convert waste into fuel while reducing aviation’s lifecycle carbon emissions.


Key Facts About the Panipat Facility

FeatureDetails
OperatorIndian Oil Corporation
LocationPanipat refinery, Haryana
Reported annual capacity30,000 tonnes
FeedstockUsed cooking oil
First batch16 November 2026
Production approachRefinery co-processing
SignificanceEstablishing commercial domestic SAF supply

Co-processing involves processing suitable renewable feedstocks alongside petroleum feedstocks within refinery infrastructure. The resulting fuel must meet applicable aviation specifications. Reports identify the Panipat batch as India’s first SAF batch produced through co-processing and cleared for commercial supply.


What Is Sustainable Aviation Fuel?

Sustainable Aviation Fuel is aviation fuel produced from eligible alternative sources that can deliver lower lifecycle greenhouse gas emissions than conventional petroleum-derived jet fuel.

SAF is chemically similar to conventional Aviation Turbine Fuel (ATF). It can be produced through different pathways using waste oils, agricultural residues and other sustainable inputs.

Importantly, SAF is broader than aviation biofuel:

  • Bio-SAF: Produced from sustainably sourced biological materials.
  • Synthetic SAF or e-SAF: Produced using renewable electricity, typically through green hydrogen and captured carbon dioxide.

What Does “Drop-In Fuel” Mean?

A drop-in fuel can be used within existing aircraft and fuel infrastructure when it meets approved specifications and blending requirements.

However, drop-in compatibility does not mean that every SAF product can automatically be used at a 100% concentration. Permitted blending levels depend on the production pathway and applicable approval. Several approved pathways permit blends of up to 50%.


How Is SAF Produced?

Different feedstocks require different conversion processes.

Production pathwayTypical feedstockBasic process
HEFA—Hydroprocessed Esters and Fatty AcidsUsed cooking oil, fats and suitable vegetable oilsHydrogen-based processing converts oils and fats into aviation-fuel hydrocarbons
Fischer–Tropsch routeAgricultural residues, forestry residues and suitable wasteFeedstock is converted into synthesis gas, then into liquid hydrocarbons
Alcohol-to-JetEthanol and other eligible alcoholsAlcohols are chemically converted into jet-fuel components
Power-to-LiquidGreen hydrogen and captured CO₂Renewable electricity supports the production of synthetic liquid fuel
Refinery co-processingEligible renewable feedstocks alongside petroleumRenewable material is processed through existing refinery systems

These pathways differ in cost, technology maturity, feedstock requirements and lifecycle emissions. Used cooking oil cannot be added directly to aircraft fuel; it requires processing, quality testing and approval.


Why Is SAF Important for Aviation?

1. Compatibility With Existing Aircraft

Replacing aircraft fleets and airport infrastructure takes considerable time and investment. Approved SAF blends offer a way to lower lifecycle emissions while using existing aviation systems.

This makes SAF particularly relevant to aviation, where alternatives to energy-dense liquid fuels remain challenging to deploy widely.

2. Potential Reduction in Lifecycle Emissions

SAF can deliver substantial emission savings, often cited as up to around 80% compared with conventional jet fuel, depending on the feedstock and production process.

The benefit concerns the entire lifecycle, including feedstock sourcing, transport, processing and combustion. It does not mean that an aircraft emits 80% less CO₂ from its engines while flying.

Illustrative example: If SAF has 80% lower lifecycle emissions and constitutes 1% of a fuel blend, the blend’s lifecycle saving would be roughly 0.8%, assuming comparable energy content and other conditions.

3. Circular Economy

Using waste materials creates value from resources that might otherwise be discarded. Used cooking oil collection can support businesses involved in aggregation, transport, verification and fuel production.

4. Energy Diversification

Domestic SAF production can diversify aviation’s fuel sources and partially reduce dependence on petroleum. However, it does not automatically make air travel cheaper: production costs and limited supply remain important constraints.

5. Contribution to Aviation’s Climate Goals

IATA estimates that SAF could provide approximately 65% of the emission reductions needed for aviation to reach net-zero CO₂ emissions by 2050.

This is an industry pathway estimate, rather than a guaranteed outcome. It depends on substantial expansion in production and use.


What Is CORSIA?

CORSIA stands for the Carbon Offsetting and Reduction Scheme for International Aviation.

Developed under the International Civil Aviation Organization (ICAO), it addresses CO₂ emissions from international aviation through monitoring, reporting, verification and offsetting requirements.

Implementation Phases
PhasePeriod
Pilot phase2021–2023
First phase2024–2026
Second phase2027–2035

Participation expands under the second phase, subject to the scheme’s coverage rules and exemptions.

Important Baseline Correction

For 2024–2035, CORSIA uses a baseline of 85% of the covered international aviation CO₂ emissions in 2019.

It is therefore inaccurate to describe its current baseline simply as “emissions above 2020 levels.”

Airlines can reduce their offsetting requirements by using CORSIA-eligible fuels, based on verified lifecycle emission savings. CORSIA is not itself a universal SAF-blending mandate.


What Is ISCC CORSIA Certification?

ISCC CORSIA is an ICAO-recognised sustainability certification scheme used to demonstrate that eligible fuels meet CORSIA requirements.

It covers issues such as:

  • Lifecycle greenhouse gas emissions.
  • Feedstock traceability.
  • Protection of high-carbon-stock land.
  • Water, soil and biodiversity safeguards.
  • Food security and social considerations.

Important distinction: Sustainability certification and aviation fuel-quality approval serve different purposes.

RequirementMain purpose
Fuel-quality and technical approvalEnsures suitability for aircraft operations
Sustainability certificationVerifies environmental criteria, traceability and lifecycle benefits

ISCC CORSIA is one recognised certification scheme, not the only possible certification route for CORSIA-eligible fuel. Indian Oil’s Panipat refinery has received ISCC CORSIA certification.


What Are India’s SAF-Blending Targets?

India has announced the following indicative targets for SAF blending in ATF for international flights:

YearIndicative SAF blending
20271%
20282%
20305%

These targets should be distinguished from a formally notified, enforceable blending mandate.

In April 2026, the government amended the ATF Control Order to include eligible SAF-blended and co-processed aviation fuel within its regulatory scope. This provides an enabling framework for SAF supply and use.

Prelims takeaway: India’s initial targets concern international flights. They should not automatically be applied to all domestic flights.


What Are the Main Challenges?

1. Production Cost

SAF production requires specialised processing, reliable feedstocks and certification. Its cost can exceed that of conventional jet fuel, affecting airline demand and investment decisions.

2. Limited Sustainable Feedstocks

Used cooking oil is useful but finite. It also has competing applications, including other biofuels. Wider deployment will require multiple production pathways.

3. Collection and Traceability

Waste oils originate from numerous restaurants, hotels and food-processing units. Reliable collection and documentation are necessary to establish the source and sustainability of feedstock.

4. Food, Land and Biodiversity Risks

Expanding fuel production must not encourage deforestation or excessive diversion of land and resources from food production.

5. Energy Requirements

Hydrogen production, refining and synthetic-fuel manufacturing can consume substantial energy. Using carbon-intensive energy can weaken lifecycle benefits.

6. Scaling Up Production

IATA identifies the pace of technology deployment and access to renewable electricity, hydrogen and other infrastructure as important constraints on future supply.


Way Forward

India should combine gradual demand creation with support for production, transparent certification and dependable feedstock supply chains. Long-term purchase arrangements can help producers invest, while lifecycle assessment should ensure that emission savings are real.

SAF adoption should also accompany more efficient aircraft, improved operations and better airport energy management. Its value lies in providing a practical route to reduce aviation’s lifecycle emissions while longer-term technologies develop.


Mains Practice Question — 250 words:

Explain the role of Sustainable Aviation Fuel in reducing aviation emissions. Discuss the technological, economic and sustainability challenges India must address to expand its production and use.